•

    High Flux RYG LED Traffic Light (200m,300mm)

    187 words1.1 min read
    • Wide operating voltage
    • Transparent polycarbonate optical lens – impact resistant
    • Anti-phantom effect minimized, optimal viewing angle
    • High intensity LED light source – low energy consumption
    • 5mm LED (DIP) by EPISTAR
    • Long life cycle – more than 80,000 working hours
    • Highly durable polycarbonate housing, UV-light resistant
    • Modular design – easy installation and maintenance
    • Easy access using of snap-in open system
    • Fixation system with L-shaped/arm-shaped mounting brackets
    • Compliance with CE, RoHS, EN12368, ISO9001
  •

    High Flux RYG Traffic Modules (200mm & 300 mm)

    113 words0.6 min read

    Lane control lights are usually composed of red forks and green arrows, common diameters are 200mm, 300mm. Lane control lights are a specific type of traffic light used to manage traffic on a multi-way road or highway. Typically they allow or forbid traffic to use one or more of the available lanes by the use of Green lights or arrow traffic lights (to permit) or by red lights or forks (to prohibit).

  •

    High Flux RYG Arrow LED Traffic Light (200mm & 300 mm)

    65 words0.3 min read
    • Wide operating voltage.
    • Fresnel polycarbonate optical lens for even light distribution.
    • Anti-phantom effect minimized, optimal viewing angle.
    • High intensity LED light source – low energy consumption.
    • High power LED (SMD).
    • Long life cycle – more than 80,000 working hours.
    • Highly durable polycarbonate housing; UV-light resistant.
    • Modular design – easy installation and maintenance.
    • Easy fixing system with aluminum mount brackets.
    • Compliance with CE, RoHS, ISO9001 & EN12368.
  •

    High Flux RYG Arrow LED Traffic Light (200mm & 300 mm)

    52 words0.3 min read
    • Wide operating voltage.
    • Polycarbonate optical lens – impact resistant.
    • Optimal light distribution.
    • Anti-phantom effect minimized, optimal viewing angle.
    • High intensity LED light source – low energy consumption.
    • High power LED (SMD).
    • Easy fixation to traffic signal housing.
    • Long life cycle – more than 80,000 working hours.
    • Compliance with CE, RoHS, EN12368, ISO9001.
  •

    High Flux Red and Green Pedestrian Crossing Light

    286 words1.6 min read
    • Working humidity: ≤95%
    • Utilizing imported LED chips, long lifespan
    • Using constant current driver
    • Low power consumption
    • Multi-ply sealed water-resistant, IP rating:>IP54
    • Visible distance: >500M
    • Long visible distance, symmetrical light distribution.
    • Novel structure and beautiful appearance, using inflaming retarding and UV-proof housing material.

    These are traffic light-controlled crossings, activated by a button, combined with a red or green figure on the other side of the road to tell pedestrians when to cross: the red figure means don’t cross, a green figure means it is safe to, and a flashing green man shows you shouldn’t start to cross, but will have time to do so if you’ve already started. There is usually also a bleeping sound as an aid to signal it is safe to cross.

    For motorists, a flashing amber traffic light follows the red ‘stop’ light, meaning they must continue to give way to any pedestrians already on the crossing and can proceed once the crossing is clear.

  •

    Traffic Light Count Down Timer

    64 words0.5 min read
    • Ability to be synchronized with any traf/signal controller.
    • Wide operating voltage.
    • Long distance visibility – enhancing road safety.
    • High intensity LED light source – low energy consumption.
    • 5mm LED (DIP).
    • Long life cycle – more than 80,000 working hours.
    • Anti-corrosive coating on cold-rolled iron housing.
    • Fixation system with aluminum mounting brackets.
    • Compliance with CE, RoHS, EN12368, ISO9001.
  •

    Yellow Solar Powered Flashing & Warning Lights

    52 words0.3 min read
    • Wide input voltage for both110/220VAC regions.
    • Transparent poly-carbonate optical lens – impact resistant.
    • High intensity LED light source – low energy consumption.
    • Long LED life cycle – more than 80,000 working hours.
    • Highly durable UV resistant polycarbonate housing.
    • Easy fixation and maintenance.
    • High waterproof and dustproof protection grade.
    • Wide operating voltage
    • Incandescent-look polycarbonate tinted lens
    • Optical fresnel lens for even light distribution
    • Anti-phantom effect minimized, optimal viewing angle
    • Excellent optical performance with high brightness SMD LED
    • Low energy consumption with LED light source
    • Long life cycle – more than 80,000 working hours
    • Highly durable polycarbonate housing, UV-light resistant
    • Modular design – easy installation and maintenance
    • Easy access using of wingnuts open system
    • Fixation system with L-shaped/arm-shaped mounting brackets
    • Compliance with CE, RoHS, EN12368, ISO9001